EthernettoolLinux

Intel(R)EthernetFirmwareUpdateToolforLinux.,2022年5月17日—Oncethetoolisinstalled,usethefollowingcommandtoread/writeinternalPHYregisters.mdio-tool[r/w][devname][addr]./mdio-toolweth0 ...,TheEthernet-MuxisatooltosupportthedevelopmentofembeddedLinuxdevices.TheEthernetMuxcanbeusedtosimulatethephysicalpullingandplugging ...,ListofLinuxnetworkingtools·netstat(ss)·tcpdump·ping·traceroute·tracepath·nm...

參考資訊如下
Intel (R) Ethernet Firmware Update Tool for Linux

Intel (R) Ethernet Firmware Update Tool for Linux.

Ethernet PHY register dump procedure in LINUX.

2022年5月17日 — Once the tool is installed, use the following command to read/write internal PHY registers. mdio-tool [r/w] [devname] [addr] ./mdio-tool w eth0 ...

Ethernet

The Ethernet-Mux is a tool to support the development of embedded Linux devices. The Ethernet Mux can be used to simulate the physical pulling and plugging ...

Linux networking tools

List of Linux networking tools · netstat (ss) · tcpdump · ping · traceroute · tracepath · nmap · dig · nslookup. nslookup command also use to find out ...

ethtool(8)

DESCRIPTION top. ethtool is used to query and control network device driver and hardware settings, particularly for wired Ethernet devices. devname is the name ...

[FAQ] How to read and write Ethernet PHY registers using a ...

2022年10月24日 — [FAQ] How to read and write Ethernet PHY registers using a Linux terminal? ... This tool is used post-boot. This tool is already integrated into ...

jwbensleyEtherate

Etherate is a Linux CLI application for testing layer 2 Ethernet and MPLS connectivity. It can generate various Ethernet and MPLS frames for testing

Linux* Intel® Ethernet NVM Update Tool快速使用指南

提供Linux* 的Intel® Ethernet NVM Update Tool快速使用指南的連結。

乙太網路埠設定工具

乙太網路埠設定工具（EPCT） 是一個命令行實用程式，允許使用者更改設備的鏈路類型。支援的類型在適配器的NVM中定義。此公用程式僅顯示下列裝置： 可能支援重新配置。 注意 ...

Using ethtool in Linux

2024年3月18日 — The ethtool is a command-line tool in Linux for managing network interface devices. It allows us to modify the parameters of the devices and ...